Submit boat MF

Phigit Class Site Arachnid Chine Hull Request registration View hull reg requests Submit boat MF View boat MFs Submit rig MF View rig MFs Request New Ownership View owner changes Submit event entry form View event entries

PHIGIT CLASS

2006

BOAT MEASUREMENT FORM  (this is not a certificate)

Authority:  Class Management Group

IN ORDER TO OBTAIN A CERTIFICATE:
1   The hull registration number shall be issued by the CMG.
2   The measurement forms, when completed, together with any registration fee that may be required, shall be sent to the CMG.

OWNER:

Before submitting,
Please make sure that this form is properly completed.
All fields are required.

Hull Registration Number

    Format: Three-letter country code, space, number

Boat's Name

 

Owner's Name

 

Owner's E-mail Address

 

Design’s Name

 

Designer’s Name

 

Builder

 

Date of Initial Measurement

  Format: YYYY-MM-DD please

NB

1. Measurements shall be carried out in accordance with the Equipment Rules of Sailing except where varied in the class rules.

2. If you have any doubt concerning the application of, or compliance of any part of the boat with, the class rules you shall report
it on the measurement form(s) before sending them to the certification authority and not sign the measurement form(s).

3. The boat shall comply with the relevant class rules even if some of the rules are not mentioned on the measurement form(s).

HULL

1

D.1.3

Is the registration number marked in an easily visible location on a non-removable part of the hull, excluding fittings and corrector weights, by any of: painting, engraving, bonding, moulding?
 Yes  No

2

D.2.2(a)

Is the hull a monohull?
Yes   No

 

D.2.2(b)

Except for  trunking for the keel and rudder(s), does the hull have hollows:

 

3

 

below 40 mm above the waterplane (except as permitted below)?
Yes   No

4

 

more than 15 mm from the centreplane (except as permitted below)?
Yes   No

5

 

which exceed 1 mm in depth when checked with a straight edge of length 300 mm?
Yes   No

6

D.2.2(c)

Is the forward 10 mm of the hull of elastomeric material?
Yes   No

7

 

Is the elastomeric material continued to the point where the bow profile exceeds 45 degrees to the waterplane?
Yes   No

8

 

In the region specified by item 7 above, is the elastomeric material at least 5 mm thick?
Yes   No

9

D.2.3

Do any fittings project outboard of the hull shell or deck?
Yes   No

APPENDAGES

10

E.1.1

Does the keel comprise more than a fin and a bulb?
Yes   No   N/A

11

E.3.1(a)

Are the keel and rudder(s) removable from the hull?
Yes   No

12

E.3.1(b)(1)

Are the keel and rudder(s) connected?
Yes   No

13

E.3.1(b)(2)

Are the keel and/or rudder(s) articulated?
Yes   No

14

E.3.1(b)(3)

Do the keel and/or rudder(s) have openings through which water could flow when in use?
Yes   No

RIGS

15

Measurement form for rigs and its sails submitted with this form

  
  Rig 1
Yes   No
  Rig 2
Yes   No
  Rig 3
Yes   No

DECLARATION BY THE OWNER

To the best of my knowledge, no materials with a density exceeding 11,300 kg/m3 have been used in the construction of
this hull or the hull appendages.  I undertake to maintain this boat in compliance with the class rules.

Signature   

(Any text entry in the 'Signature' field confirms Owner's declaration and undertaking.)

COMMENTS

If the owner has any doubt concerning the application of, or compliance of any part of the boat with, the class rules he shall
report it below before sending the form to the certification authority and not sign the measurement form(s).

©2007 Lester Gilbert